[Techtoolslist] 9100a lives

[Andre Huijts]

Believe Andrew ! 

Verstuurd vanaf mijn iPad

> Op 12 jan. 2016 om 02:59 heeft Andrew Welburn <andy at andysarcade.net> het volgende geschreven:
> 
> enabled line causing timout is normal if you press reset with the pod plugged into itself.
> 
> Read the manuals.. thats all i can say, there's a lot of them, but its worth it, there is no quick guide, there's too much stuff to gloss over.
> 
> Andrew Welburn
> http://www.andys-arcade.com
> 
>> On 11/01/2016 16:15, David Shoemaker wrote:
>> Got a scsi2sd adapter with 4gb card.  Grabed the 6.1 image and used win32diskimg to write it to the sdcard.
>> 
>> Opened up my 9100.  Had v5.0 roms in it so didn't change them yet.
>> 
>> Connected scsi and power to new adapter and it boots.
>> 
>> With  6502 pod connected and the cable in selftest position when I boot it I am getting a message: "enable line causes timeout".
>> 
>> The pod (6502) passed selftest: Main menu - pod  - enter
>> 
>> Any idea what that message means?
>> 
>> Is there a real getting started guide out there?  The one on ttl is more an unboxing guide than a new user guide.
>> 
>> David  :-)=
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist at flippers.com
>> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/