[Techtoolslist] 9100a lives

[Andrew Welburn]

enabled line causing timout is normal if you press reset with the pod 
plugged into itself.

Read the manuals.. thats all i can say, there's a lot of them, but its 
worth it, there is no quick guide, there's too much stuff to gloss over.

Andrew Welburn
http://www.andys-arcade.com

On 11/01/2016 16:15, David Shoemaker wrote:
> Got a scsi2sd adapter with 4gb card.  Grabed the 6.1 image and used win32diskimg to write it to the sdcard.
>
> Opened up my 9100.  Had v5.0 roms in it so didn't change them yet.
>
> Connected scsi and power to new adapter and it boots.
>
> With  6502 pod connected and the cable in selftest position when I boot it I am getting a message: "enable line causes timeout".
>
> The pod (6502) passed selftest: Main menu - pod  - enter
>
> Any idea what that message means?
>
> Is there a real getting started guide out there?  The one on ttl is more an unboxing guide than a new user guide.
>
> David  :-)=
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>