[Techtoolslist] For the Fluke Z8000 Pod - making interface PCB for Z8002 CPU

[Steve Larkins]

Hi John
I need an adapter for my Z8000 pod any chance you have on set spare still?

On Sat, 27 Oct 2018 at 02:28, John Robertson <jrr at flippers.com> wrote:

> On 2018/09/04 9:00 PM, John Robertson wrote:
> > On 2018/09/04 8:42 PM, John Robertson wrote:
> >> I have a Z8000 pod and am in the process of making a PCB for the
> >> Z8001 test socket on it so I can test Z8002 (Pole Position of course)
> >> logic. The PCB is to adapt the Z8002 CPU to the Z8001 test socket.
> >>
> >> I will likely be making two or three of these (minimum quantity) so
> >> if anyone is interested in one for their Z8000 pod please let me know
> >> - @ cost plus postage. I plan on having the PCBs run off either later
> >> this week or next.
> >>
> >> John :-#)#
> >>
> > Right, just remembered that I need two of these, one to load the Z8002
> > in the Z8001 socket on the Z8000 pod, and a second to take the 48 pin
> > cable's UUT Z8001 plug and convert that to the 40 pin Z8002 socket on
> > the PP board.
> >
> > So, will be making these in pairs. Anyone else interested in a pair?
> >
> > John :-#)#
> >
> I have had the Z8002 adapter boards made now, and I have two spare pairs
> - and three others which are spoken for. $10USD per PCB pair plus
> postage ($10USD to USA) for TTL members only.
>
> Note this is for a single pair of bare boards, you will need sockets and
> headers...
>
> John :-#)#
>
> --
> How to subscribe or unsubscribe from TTL
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>