[Techtoolslist] Looking for Kurz Kasch 410A Pole Position card

[Jeff Anderson]

I have a still-sealed new 410A if you want to borrow it to use or copy. I
don't know that I'd actually care about keeping it outside of having a
fairly complete set of KK cards, but I can't imagine I'd ever use this one
as the PAT already covers PP.

I was just testing some PP sets on a PAT9000 a couple days ago and even
that rig already has a little bit of a tough time powering them.  I'm
probably going to modify a plug for the external power like they did with
later high-current boards like I,Robot, system 1/2, Hard Drivin, etc. - I'd
think just rolling your own harness and using a switcher PSU would be less
awkward than using a TF-650 for testing PP boards.

On Tue, Dec 14, 2021 at 4:44 PM Matthew Rossiter <matt at rossiters.com> wrote:

> One thing I've done in the past is get these 22/44 pin bus extender
> cards and just re-purpose other Kurz Kasch cards.
>
>
> https://www.corshamtech.com/product/2244-pin-extender/?attribute_pa_build-options=bare-pc-board
>
> So I could use a Tempest card to drive a pole position board, for
> example.   I could wire up the gas to one of the Pots, but figure it'd
> be easier to ask the group first.  Especially since I may be able to
> offer some interesting trades.  ;)
>
> Also, since it's getting cheaper to produce pcb's now, another idea
> would be to just design one in software.  I have the photo and
> schematics for a Gravitar 409A as an example.   I'm a newbie in that
> department though,  I'm trying to learn KiCad but suggestions are welcome.
>
> Matt
>
>
> On 12/14/2021 1:18 PM, John Robertson via Techtoolslist wrote:
> > On 2021/12/14 12:59 p.m., Matthew Rossiter wrote:
> >> Just curious if anyone has an extra one in their stash somewhere?
> >> I'm in the process of building an actual test harness, but these
> >> cards save so much space and time in my little garage bench.
> >>
> >> Matt
> >>
> >> ______
> > All I have is the PDF of the card instructions. Never saw that one! I
> > have the PP adapter for my Atari Orange box - which doesn't help you
> > though.
> >
> > Perhaps someone here has the card and can provide some photos of it -
> > front and back - so Matt can fake one up using one of those blank
> > cards that were listed here a few years back...
> >
> > John :-#)#
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>