[Techtoolslist] Fluke keyboards question

Barry Shilmover barry at shilmover.com
Mon Feb 13 13:01:56 EST 2023


Thanks,

Yeah, I was using your picture to compare it to mine :)

I will have to try that.  I am assuming the matrix is different between the
2 keyboards.  The 9100 is part number 5-64993-143, mine is 5-64955-099.

I need to figure out the matrix on both keyboards and see if I can build a
small adapter.

B

On February 13, 2023 at 9:49:14 AM, William Stillwell (ki4swy at gmail.com)
wrote:

When I made the USB Data Logger, a fellow user actually sent me his Fluke
Keyboard so i could data log ALL the keyboard key combos ( as they were not
documented ) ..

I would connect the keyboard up and setup , the pinout is in my git hub

https://github.com/ki4swy/FlukeUSBAdapter

You will need to apply power, then pull reset low to reset the keyboard,
and then using a Standard TTL USB Serial Adapter set to 1200 Baud, see the
codes from the keyboard ( use something that can view Hex Data, not ASCII )

I do have a picture of the two style keyboards:

https://github.com/ki4swy/FlukeUSBAdapter/blob/master/Fluke%20keyboards.jpg

Notice the Fluke actually uses 2 Key Wide Buttons on the number pad.


William Stillwell

Board Member & Co-Founder - Byte Amusement Group // Free Play Florida
Arcade & Pinball Show a 501c3 organization

Member of MakerFX - a 501c3 organization - Orlando's Premier Maker Space

Volunteer for The Phoenix - a 501c3 Organization - Providing outreach and
events for those who are living a sober lifestyle.

Former Board Member - West Central Florida Group - a 501c3 Organization. -
Providing Emergency Communications across Central Florida.

Former Board Member - Inspiration labs, Inc. a 501c3 organization - Tampa's
Premier Maker Space.


On Mon, Feb 13, 2023 at 12:05 PM Barry Shilmover <barry at shilmover.com>
wrote:

> All,
>
> I have a couple of Fluke products made for warehouse/assembly (namely the
> Fluke 1020 and 1050). They are both touch screens with a keyboard. One is
> monochrome, the other color. Anyway, I picked up the 1020 because it had
> the keyboard and wanted to see if I could use it with the 9100 (and the
> monitor is nearly identical inside too).
>
> Anyway, the keyboard looks like the original 9100A keyboard from Oak, but
> the keys are a bit different (see picture). The cable was ruined, so I
> swapped that. The 9100 recognizes that there is a keyboard attached and
> goes into programmer’s mode, but the keyboard does nothing except for
> beeping when keys are pressed (LEDs on the keyboard flash when fluke
starts
> and work when pressed).
>
> Since I had it open, I pulled the EPROM and read it, figuring I could take
> the ROM from the similar 9100A keyboard and make it mostly work. The PCB
> in the keyboard appears identical, its the strange cpu with the
piggybacked
> eprom. When I compare the ROM file on TTL ftp site and the one I read off
> my keyboard, they are identical. Which surprised me. All I can think of
> is that some of the other chips on the pcb are different.
>
> Anyone have one of the Oak fluke keyboards that can send me high
resolution
> images of the PCB and chips on the board?
>
> Thanks,
>
> Barry
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist at flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/


More information about the Techtoolslist mailing list