[SBE] BE FM5B Transmitter Parts

k7cr k7cr at blarg.net
Wed Jan 30 14:31:12 EST 2008


Harris and BE use external LP filters on their rigs.
They are both concerned as to the amount of line
between their output network and the input to the
LPF.

Clay
----- Original Message -----
From: <chscherer at everestkc.net>
To: "sbe member discussion mail list" <sbe at sbe.org>
Sent: Wednesday, January 30, 2008 9:39 AM
Subject: Re: [SBE] BE FM5B Transmitter Parts



> It matters on a 20H3. If I remember, that LP filter is part of the output

> connection. The filter on a BE is a separate can with flange fittings as I

> recall.

>

> ----- Original Message -----

> From: k7cr <k7cr at blarg.net>

> Date: Wednesday, January 30, 2008 11:27 am

> Subject: Re: [SBE] BE FM5B Transmitter Parts

>

>> I believe that Chuck is looking for the low pass filter, this is

>> external to the transmitter, ie, it does not matter the model.

>>

>> Clay

>> ----- Original Message -----

>> From: "Chris Tarr" <ctarr at entercom.com>

>> To: "k7cr" <k7cr at blarg.net>; "sbe member discussion mail list"

>> <sbe at sbe.org>Sent: Tuesday, January 29, 2008 6:41 PM

>> Subject: RE: [SBE] BE FM5B Transmitter Parts

>>

>> Sorry guys!

>> I have a Harris FM20H3, not a BE FM20...

>>

>> -----Original Message-----

>> From: k7cr [mailto:k7cr at blarg.net]

>> Sent: Tuesday, January 29, 2008 7:34 PM

>> To: sbe member discussion mail list

>> Cc: Chris Tarr

>> Subject: Re: [SBE] BE FM5B Transmitter Parts

>>

>> Contact Chris Tarr at Entercom Milwaukee, he should have something

>> from an old FM20 that would work

>>

>> Clay Freinwald

>> ----- Original Message -----

>> From: "Chuck Bullett" <chuckbullett at gmail.com>

>> To: "sbe member discussion mail list" <sbe at sbe.org>

>> Sent: Tuesday, January 29, 2008 2:45 PM

>> Subject: [SBE] BE FM5B Transmitter Parts

>>

>>

>> > Is anyone parting out an FM5B from BE (late 80's vintage)?

>> >

>> > We just lost the Lo Pass filter on ours here in San Francisco.

>> It was

>> > manufactured by Bird for BE, OEM P/N 3111M. I'm looking for an L-

>> P filter

>> > that needs a home.

>> >

>> > Lo Pass cutoff= 108mHz.

>> >

>> > Thank You.

>> >

>> > Chuck Bullett

>> > KNBR-KSAN-KFOG San Francisco

> _______________________________________________

> SBE mailing list

> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe

> _______________________________________________

> SBE at sbe.org

> http://seven.pairlist.net/mailman/listinfo/sbe

>

>





More information about the SBE mailing list