[SBE] hole in heliax
Stu Casteel
stu at pacific.net
Wed Aug 6 17:58:51 EDT 2008
Dime sized holes 300' up on 3" line?
that's some right decent shootin with a decently sized round!
> On Wednesday 06 August 2008 03:56 pm, Gary Blievernicht wrote:
>> these are big holes about a dime in diameter.
>
> Those are big. I'd like to see them before speculating
> much further.
> Where are you ? Driving distance from me ?
>
>> the network analyzer measured it as an "open"
>> 330 foot from the test point.
>
> Almost sounds like bullet wounds, ( in which case a splice(s)
> right at the hole(s) should be all you need ) but I'd still like to see
> them.
>
> On Wednesday 06 August 2008 04:02 pm, Reynolds, Paul (CXR-San Antonio)
> wrote:
>> Ahhhhh ! You have a bad line. Get rigger to cut out a section then.
>> Cut it once above the upper hole nice and square. Examine interior.
>> Then some how, some way, remove enough clamps on the lower part to
>> where
>> it will loop out and down so you can cut off about 10-20' so the 'chips
>> will fall out...not down into the flex.
>
> Personally, I like tubing cutters. ( unlike many other climbers )
> NO chips at all.
>
> --
> Cowboy
>
> http://cowboys.homeip.net
>
> Ever notice that even the busiest people are never too busy to tell you
> just how busy they are?
>
> _______________________________________________
> The SBE Roundtable, SBE at sbe.org
> To unsubscribe, go to http://seven.pairlist.net/mailman/options/sbe
>
> http://seven.pairlist.net/mailman/listinfo/sbe
>
More information about the SBE
mailing list