[SBE] truck for sale, EFP, radio, eqpt demo, or ???

[John Baich]

Henry,

 

A CDL is required if the truck has a GVWR of 10k or more and used for
commercial purposes; self moving vans are exempt only when used for that
purpose.  

 

 

John J. Baich

VP Engineering & Operations 

Fox Television Stations, Inc. - WFLD/WPWR

205 N. Michigan Avenue

Chicago, IL 60601

 

312-565-5540

 

john.baich at foxtv.com

 

P Please consider the environment before printing this email.

 

________________________________

From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of
a9xw at cs.com
Sent: Thursday, February 04, 2010 18:21
To: sbe at sbe.org
Subject: [SBE] truck for sale, EFP, radio, eqpt demo, or ???

 

Truck:  26' former Ryder rental. front mounted over cab dual compressor
A/C, distributed electric heat. breaker panel with 2 "legs" and about 12
circuits per leg. Change over relays for shore/gen power. seperate
gen/shore connections for HVAC and Technical.  On board, 2 Onan
commercial 7.0 KW generators, cross fed batteries for starting plus
engine charging through diode so gen set cannot drain truck motor start
battery. Gasoline. Interior gen start and meter panels. I think its an
87 GMC  TopKick.  [I'll check title} Currently licensed ready to roll.
CDL not required. We bought it from Texas in late 03, put it on the road
in 04. Was in service until middle of 09 when we got a new 42' Gerling
and Sprinter SDI production and sat truck. Equipment was removed in
December of 09 and truck was parked outside Jan 15, 2010.  Could be
reloaded and connected in 2 days or less.  

 

Interior has 4 racks in front with standing space behind, counter top,
far left was cut out for GVG 200 switcher. I have full Autocad
Documentation of layouts, floor plan and cables. There is audio booth in
middle area with over head rack and window to see front monitors. Behind
is 3 rack with counter set up for two edit controllers and monitors.
Rack 3 was switcher and support hardware. Space for 4th rack.

Front had Chyron Infinite and GVG200 was fully loaded with GVG 2 ch DVE.
We ran 6 DVCam decks, 5 cameras. 

Full connector bay on front passenger side of box for inputs, outputs,
IFB, intercom and door light.  internal connector panel in back area of
truck that also serves as storage for reels between racks and back lift
door.  One side door between audio and rack space on passenger side.
aluminum steps slip on.  WITH OR WITHOUT EQUIPMENT:  GVG 200, analog
monitors (various color and B&W source) Infinite with latest software,
RTS intercom (wired for 4 internal stations and 6 external). Cables run
front to back in covered plastic cable tray both sides of truck. Cables
left in place with full documentation.  Audio mixer was Mackie 1604VLZ
and over head rack held CD, patch panel, audio DA's, audio processor and
over mixer light. Interior lights DC and AC. 4 channel DPS frame sync
lots more.

Well maintained, starts and runs fine. I think about 90k miles.
Currently WHITE but yellow showing in places. Truck has been garaged and
all equipement is in our station building, racked and stacked. Truck was
never rented to others. No damage.   

Great for someone that wants a starter truck that can do sports, news,
EFP, church etc. 

 

MAKE AN OFFER! 

 

Henry Ruhwiedel

WYIN TV WLPR FM

a9xw at cs.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20100204/24f53932/attachment.htm>