[SBE] ASI through IP for STL
Mulliner, Rich
MullinerR at WLNYTV.com
Wed Aug 11 09:35:21 EDT 2010
Rolin
I currently use (ASI-IP) to our head ends and transmission sites without
any problems, you can use MW or Ethernet to deliver the TS. Give me a
call and I would be happy to fill you in.
Richard L. Mulliner
Director of Engineering/IT WLNY TV
Office: 631-622-9471
Cell: 516-456-6606
________________________________
From: sbe-bounces at sbe.org [mailto:sbe-bounces at sbe.org] On Behalf Of
Rolin Lintag
Sent: Wednesday, August 11, 2010 9:08 AM
To: sbe at sbe.org
Subject: [SBE] ASI through IP for STL
We've been testing and trying out IP links using underbuilds on present
analog MW links and the TCP-IP seems to be getting to where we can
reasonably expect them to be. What we need some help on is getting ASI
through IP links, with the hope that it can be a back-up digital STL.
The ones we tested so far have jitter goosebumps to overcome.
Can anyone using a proven system share their experience and set-up that
gets ASI from one site to another via IP? Can you do HD, too?
I'd appreciate getting info on what equipment you are using and your
good or not-so-good experience with them.
Thanks!
Romualdo "Rolin" Lintag, CSTE
Chief RF Engineer
Victory Television Network
KVTN-DT 25.1 Little Rock, AR
KVTH-DT 26 Hot Springs, AR
KVTJ-DT 48 Jonesboro, AR
www.vtntv.com
'Smart people learn from their own experience but the wise ones from
others."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://seven.pairlist.net/pipermail/sbe/attachments/20100811/f12ce925/attachment.html>
More information about the SBE
mailing list