[Techtoolslist] Fluke 9000 Pod (Z80) UUT ribbon cable

[Pat Danis]

I believe Raymond Jett (Channelmanic or Channelmaniac on other forums) sourced some of that cable. I don’t know if he is on here. I will ask and see if he has any left

Pat

Sent from my iPhone

> On Jan 2, 2023, at 1:33 PM, Greg Baumgratz <voyager at galaxian.com> wrote:
> 
> Happy New Year to all!
> 
> There's not much in my TTL archive about this, and varying opinions/options upon web searches but I wanted to see what the current thought are on this topic?  I have a Z80 pod that works depending on how you position the pod/cable.  If it's working you can twist the cable slightly at the pod and it will stop working. I have pulled it apart and did notice that the upper level ground foil did split and I bridged this will wire/solder.  Still seems to be doing failing.  The 40 pin dip side seems fine - any options?  Has anyone re-terminated the pod side?  Any replacements available?  I see some pages reference just using a 40 pin flat cable - has anyone tried this and if so what are your experiences?
> 
> Thanks,
> Greg
> 
> 
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist at flippers.com
> https://pairlist7.pair.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/